Home > Product > series > AC Power Supply
IT7900EP High Performance Regenerative Grid Simulator
Adopting advanced SiC technology, the IT7900EP series high-performance Regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load.The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also save a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900EP up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900EP to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, reverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.
Find a product
350 V
525 A
105 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
350 V
420 A
84 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
350 V
315 A
63 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
350 V
210 A
42 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
350 V
105 A
21 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
350 V
630 A
126 kVA
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
Show all
* The above specifications are subject to change without prior notice.
Product Features

Parameter Features
Adopt advanced SiC technology
High power density, up to 21 kVA for 3U
Voltage can reach 350V L-N
Highly efficient power regeneration
Master and slave equal flow, parallel machines up to 1MVA
Comprehensive working modes selectable: single-phase, three-phase, reversed phase and multi-channel, Voltage extension to 200% of rated voltage in reversed mode
Support LIST/SWEEP/Surge&Sag three waveform modes
Built-in rich waveform database
Harmonic simulation and analysis function up to 50 times, built-in IEC61000-3-2/3-12*1
Can simulate arbitrary waveform output, support CSV file import waveform
Phase angle 0-360° settable
Touch screen design, simple UI interface
Built-in USB/CAN/LAN /Digital IO interface,optional GPIB/analog & RS232
Full protection functions including automatic clearing,POVP ,watchdog, etc.
Support CANopen*2、Modbus、LXI、SCPI communication

Source Features

Regenerative grid simulator & full4-Quadrant AC&DC power sources

Frequency: 16-2400Hz *3

Power Amplifier function for PHiLapplications

Four output modes of AC/DC/AC+DC/DC+AC canbe realized

Programmable output impedance,simulation ofreal-world impedance

Harmonic/inter harmonic synthesis

Compliance tests incl. LVRT /PhaseJump/Frequency variation/harmonic injection

Supported regulatory testing includeIEC61000-4-11/4-13/4-14/4-28

Optional software can help complete thepre-compliance standards test of civil avionics/electrical shipsinterms of the multi-national safety regulations.

Load Features
♦ Regenerative full 4-Quadrant AC&DC load
♦ Frequency: 16-500Hz
♦ AC mode supports CC/CP/CR/CS/CC+CR/CE multiple operating modes, and CE mode can simulate a variety of circuit topologies such as single-phase rectifier RLC and shunt RLC.
♦ DC mode supports 9 working modes such as CC/CR/CP/CV
♦ AC mode supports both rectified and non-rectified modes
♦ Adjustable crest factor: 1.414 ~ 5.0
♦ Support phase shift function in the range of -180º~180º *4
♦ The unit power factor1 function allows the current waveform to vary with the voltage waveform and the power factor is as close to 1 as possible
♦ Supporting unloading angle control, 0-359° adjustable

*1.Voltage/current harmonic analysis, v oltage harmonic simulation in sour ce mode, current harmonic simulation in load mode, fundamental wa ve≤60Hz

*2.Stay tuned
*3 In grid simulator and islanding simulation mode, 16~150Hz
*4 After turning on the rectification function, the setting range of the phase shift is restricted by the crest factor

Functions and Advantages

All in one unit

IT7900EP series integrates 3 products, a grid simulator, an AC/DC programmable power supply and a regenerative AC/DC load.

4-Quadrant output

IT7900EP series is not only a full four-quadrant power grid simulator, but also a full four-quadrant AC/DC electronic load. It can operate in all four quadrants. The efficient energy regeneration function makes it good for testing the frequency change of grid-connected PV inverters, voltage transients and anti-islanding protection.

High power regeneration efficiency

Whether it is used as a grid simulator or a load, in AC or DC mode, the IT7900EP is high efficiently power regenerative. The energy generated by the DUT can be fed back to the local grid instead of dissipating in the form of heat, which is good for energy-saving and environment protection.

Complete operating mode

Simulate power grid and low voltage ride through (LVRT) testing

Low voltage ride-through refers to the ability of the power generation system to continue to operate without disconnecting from the grid within a certain
range of voltage drop when the grid fault or disturbance causes a voltage drop, and even provides a reactive power to help the system recover the
voltage. You can edit the test parameters under LVRT condition. With the fast response, it can fully meet the test requirements of LVRT. At the same time,
the IT7900EP series has the function of arbitrary waveform. With the LIST function, it can edit and simulate various grid disturbance waveforms through
the panel or software, such as instantaneous power failure, surge and voltage rise and fall.

Options & Accessories
  • IT-E9003(Optional)
    ITECH Warranty up to 3 years
  • IT-E9005(Optional)
    ITECH Warranty up to 5 years
  • IT-E168/169 (Optional)
    Parallel fiber Suite Single ma...
  • IT cabinet(Optional)
    IT cabinet 15U/27U/37U
  • AC power cord(Optional)
    AC power cord, 5m
  • IT-E177(Optional)
    RS232/Analog communication car...
  • IT-E176(Optional)
  • IT-E33620-OO (Optional)
    360A/2m/ round terminal a pa...
  • IT-E32410(20)-OO(Optional)
    240A/1m(2m)/Round terminal, a ...
  • IT-E31220-OO (Optional)
    120A/2m/ round terminal one ...
  • USB
    For USB port communication
  • AC power cord (accessory)
    AC power cord (accessory)
Related Products
Relevant Solutions
Related technical articles
User's Manual
Product catalog
***Item is required. Please submit the information after completion.
You have submitted it successfully, We will review it as soon as possible.

No Records

More information Product / Solutions